Features
The CCT includes standards features designed specifically for Critical Care Transport.
Multiple seating configuration for CCT staff.
On the curbside of the vehicle there are two high back four-point seats. On the streetside of the vehicle there is a four-point built-in seat with storage underneath. At the head of the cot there is a four-point attendant seat that can swivel and face forward.
Infectious Control
Interior comes as standard with three separate biohazard trash and sharps containers located next to each seat. Anti-microbial grab bars on all three entrance doors and ceiling. Built-in area for hand sanitizer dispenser, paper towels, trash bags and emesis bag dispenser. Three separate locations for storage of three sizes of rubber gloves. Comes with anti-microbial vinyl flooring. Liquid stop installed between cab and mod to prevent fluids intruding in the cab. Stainless steel covering on entrance doors, lower streetside cabinets and squad bench with recessed coved floor.
Ducted Heat/AC
Leader engineered the shape of the duct to maximize even air flow and to provide you with the remarkably fast and efficient exchange of air in the patient compartment. We put the vents on the upper streetside running the full length of the vehicle. Located near the ceiling, in order to provide conditioned air directly to the patient and medics, are seven adjustable vents.
Specifications
The standard specifications for the Type 3 CCT.
- All aluminum module
- LED warning and scene lights, Whelen SurfaceMax
- LED turn, brake, reverse and FMVSS marker lights
- LED strip lighting in exterior compartments
- LED Running board lights
- 100,000 CP Handheld Spotlight, black rubber, halogen, hard wired
- Power activated door locks installed on patient compartment access doors
- Activated via (OEM) door lock switches in cab, w/ (2) patient compartment door lock switches – (mounted on interior bezels)
- Full length window in curbside of patient module
- M1 Streetside front compartment for back board storage
- M2 Streetside intermediate compartment for spare tire and inverter storage
- M3 Streetside rear compartment for dual oxygen bottle storage
- M4 Curbside rear compartment for dual medical air bottle storage
- M5 Curbside forward (lower) compartment for battery storage with slide out tray
- Cab Running Boards, polished aluminum diamond plate running boards with mud flap
- Stainless steel DOT approved wheel inserts shall be installed on all four outside wheels of the chassis
- Leader’s signature cab overhead switch panel helps keep the driver focused on the road
- The overhead also includes a fully programmable siren with diagnostic LED’s, dual driver and passenger LED courtesy and map lights
- All switches have indicators with LED backlighting which is virtually maintenance free
- Voltage meter, overhead console mounted, 0 – 18 volts
- Amperage meter, overhead console mounted, with remote induction sensor
- Center Console w/ (2) cup holders and map storage under lid w/ (2) 12 volt USB ports
- Map box with (3) polycarbonate dividers, attaches to rear of center console
- Patient compartment dome lighting and Heat/AC are controllable from both patient area and cab
- Capacity for two oxygen bottles and three oxygen outlets, one at action wall and two in the ceiling (electronically switched)
- Capacity for two medical air bottles and three medical air outlets, one at action wall and two in the ceiling (electronically switched)
- Two separate suction systems, one at action wall, and one curbside rear
- 1800 watt inverter/battery charger with (2) 110V outlets
- Ceiling mounted drop down DVD player
- Refrigerator, 12 volt with 1.7 cubic feet of storage
- (2) holders for D size oxygen bottles
- (3) IV holders recessed in the ceiling
- (3) captain’s chairs with IMMI Per4Max restraints, (2) mounted on the curbside of the vehicle and (1) Attendant Seat, allowing attendants to easily reach the patient, switches and medical equipment without unfastening the restraint
- Streetside bench seat with (1) IMMI Per4Max restraint, storage below bottom cushion
- All upper streetside and curbside cabinets are sliding with restocking option
- All interior cabinets have LED strip lighting
- Storage tray for saline bottles
- (10) flush mount LED dome lights in patient compartment
- Electric switched oxygen with digital read out with manual by-pass
- Emergency digital time manager clock with multiple modes
- Action area control center with dual oxygen outlets, built in suction system, 110V & 12V Outlets and dual USB charging port
- All countertops are solid surfacing material for long-term durability
- Streetside upper cabinet ducted Heat/AC provides an efficient even flow of air throughout the vehicle with (7) directional air vents
- Equipped with a restocking timer located at curbside wall that powers the streetside domes
- Positive latches on all cabinet sliders to keep medical supplies stored safely
- Leader designed rear step bumper for extra safe traction and long term durability
- Privacy tint on all patient compartment widows
- High conspicuity band on interior of entrance doors for greater night visibility when doors are open
- Rear View Camera System
- Additional strap supports on both cab doors to prevent hinge stress
- Set up for carrying two isolettes
- Air conditioning auxiliary condenser, (dual fan) located underbody
- Auto-eject Shore Power, 120V, 15 amp, behind driver door, to female plug in inverter compartment
- Power door locks for exterior compartment doors. (Except Battery Compartment door)
- Low Frequency Siren – Whelen “Howler”, includes (2) speakers, & (1) drivers side “Linemaster” foot switch
- Hidden Door Lock Switch
- Cot Mounts, Power Load Systems, Power Cots
- CCT 1,300 lb. lift on rear of module
- Liquid Spring Rear Suspension
Models
| Chassis | Model | WB | Engine | Alternator | Batteries | Fuel |
|---|---|---|---|---|---|---|
| Ford | E450 | 158 | 7.3 Liter Gas | 240 Amp | Quad | 40 Gal |
Ask the Leader Ambulance Experts
Have questions about our products or services? We’d love to hear from you.